1000mpa Hooked End Loose Concrete Steel Fiber 1 Year Warranty

High Tensile Strength >1000Mpa Concrete Hooked End Loose Steel Fiber For Concrete 1 Year Warranty

Steel Fiber Introduction

We supply Steel Fibers made from prime quality hard-drawn steel wire to ensure high tensile strength.The wire is deformed with hooked ends and cut to lengths, used in reinforcement concrete, mortar and other composite materials. Due to this high strength,the uniform distribution of fibers, stresses can be fully dispersed and cracking be effectively controlled.

Compared with normal concrete, steel fiber concrete has great improvement in tensile strength, flexural strength, abrasion resistance, impact resistance, fatigue resistance, toughness,crack resistance performance, because numbers of steel fiber is evenly dispersed in the concrete, concrete strength is improved deeply.

Typically the fibers are added at the batch plant, just after all concrete aggregates are being mixed. Some people would request to have the fiber added at the job site, but then the QA/QC should have more control on how much fiber

is added. The steel fiber manufacturer can provide guidance on how to mix and the amount needed to obtain the desired results. Be aware that if you add too much fiber, it might show up at the surface when finishing the concrete

so be cautious about the amounts being mixed.

Specifications:

• Steel Fiber	Model	Diameter (mm)		Length (mm)		Aspect ratio (mm)		Tensile strength (MPa)
  	YS-60/60	1		60		60		≥1000
  	YS-50/50	1		50		50		≥1000
  	YS-65/60	0.9		60		65		≥1000
  	YS-55/50	0.9		50		55		≥1000
  	YS-80/60	0.75		60		80		≥1000
  	YS-45/35	0.75		35		45		≥1000
  	YS-50/30	0.6		30		50		≥1100
  	YS-55/30	0.55		30		55		≥1100
  	YS-65/35	0.53		35		65		≥1100
  	YS-60/30	0.5		30		60		≥1100
  	YS-50/25	0.5		25		50		≥1100
  	YS-60/25	0.4		25		60		≥1100

FAQ:

1. Are you the factory?

Yes, we are, located in the hometown of wire mesh.

2. How far from Beijing airport?

It takes three hours from our factory to Peking airport,about 300km.

3. Can you accept OEM?

Yes, we can.

4. What is your delivery time?

Generally it needs 10days for 20’ container.

Application:

• Shotcrete
• Industrial flooring
• Road pavements
• Refractory material
• Precast concrete structures
• Military project
• Brake pads

 Package and Delivery